CISCO 200-301 TEST VCE, 200-301 EXAM PAPERS

Cisco 200-301 Test Vce, 200-301 Exam Papers

Cisco 200-301 Test Vce, 200-301 Exam Papers

Blog Article

Tags: 200-301 Test Vce, 200-301 Exam Papers, 200-301 Real Exam, 200-301 Real Testing Environment, Valid Braindumps 200-301 Ebook

Nowadays, using computer-aided software to pass the 200-301 exam has become a new trend. Because the new technology enjoys a distinct advantage, that is convenient and comprehensive. In order to follow this trend, our company product such a 200-301 exam questions that can bring you the combination of traditional and novel ways of studying. The passing rate of our study material is up to 99%. If you are not fortune enough to acquire the 200-301 Certification at once, you can unlimitedly use our product at different discounts until you reach your goal and let your dream comes true.

Cisco 200-301 Exam is a challenging but rewarding certification exam that can help you advance your career in the IT industry. With the right preparation and dedication, you can pass the exam and earn your CCNA certification.

>> Cisco 200-301 Test Vce <<

100% Pass Quiz 2025 Marvelous 200-301: Cisco Certified Network Associate Exam Test Vce

Our 200-301 training guide is not difficult for you. We have simplified all difficult knowledge. So you will enjoy learning our 200-301 study quiz. During your practice of our 200-301 exam materials, you will find that it is easy to make changes. In addition, our study materials will boost your confidence. You will be glad to witness your growth. Do not hesitate. Good opportunities will slip away if you stand still.

Cisco Certified Network Associate Exam Sample Questions (Q552-Q557):

NEW QUESTION # 552
What are two characteristics of a controller-based network? (Choose two)

  • A. It uses northbound and southbound APIs to communicate between architectural layers
  • B. It moves the control plane to a central point.
  • C. It decentralizes the control plane, which allows each device to make its own forwarding decisions
  • D. The administrator can make configuration updates from the CLI
  • E. It uses Telnet to report system issues.

Answer: B,D


NEW QUESTION # 553
Which two functions are performed by the core layer in a three-tier architecture? (Choose two)

  • A. Police traffic that is sent to the edge of the network.
  • B. Ensure timely data transfer between layers.
  • C. Inspect packets for malicious activity.
  • D. Provide direct connectivity for end user devices.
  • E. Provide uninterrupted forwarding service.

Answer: B,E

Explanation:
Explanation
Cisco is very clear about the purpose of this layer. Its only role is to forward traffic, the fastest it can. Here you don't apply any policy, as you must try to reduce the load of the core so it can focus on routing.
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Campus/campover.html#wp708831


NEW QUESTION # 554
What is the purpose of traffic shaping?

  • A. to mitigate delays over slow links
  • B. be a marking mechanism that identifies different flows
  • C. to provide fair queuing for buffered flows
  • D. to limit the bandwidth that a flow can use to

Answer: C

Explanation:
Explanation
Traffic shaping retains excess packets in a queue and then schedules the excess for later transmission over increments of time.


NEW QUESTION # 555
Physical connectivity is implemented between the two Layer 2 switches,
and the network connectivity between them must be configured.
I . Configure an LACP EtherChanneI and number it as 44; configure it
between switches SWI and SW2 using interfaces EthernetO/O and
Ethernet0/1 on both sides. The LACP mode must match on both ends.
2. Configure the EtherChanneI as a trunk link.
3. Configure the trunk link with 802. Iq tags.
4. Configure VLAN 'MONITORING' as the untagged VLAN of the
EtherChannel.
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.

Answer:

Explanation:
Solution is given below explanation.
Explanation
To configure an LACP EtherChannel and number it as 44, configure it between switches SW1 and SW2 using interfaces Ethernet0/0 and Ethernet0/1 on both sides, configure the EtherChannel as a trunk link, configure the trunk link with 802.1q tags, and configure VLAN 'MONITORING' as the untagged VLAN of the EtherChannel, you need to follow these steps:
On both SW1 and SW2, enter the global configuration mode by using the configure terminal command.
On both SW1 and SW2, select the two interfaces that will form the EtherChannel by using the interface range ethernet 0/0 - 1 command. This will enter the interface range configuration mode.
On both SW1 and SW2, set the protocol to LACP by using the channel-protocol lacp command.
On both SW1 and SW2, assign the interfaces to an EtherChannel group number 44 by using the channel-group 44 mode active command. This will create a logical interface named Port-channel44 and set the LACP mode to active on both ends. The LACP mode must match on both ends for the EtherChannel to form.
On both SW1 and SW2, exit the interface range configuration mode by using the exit command.
On both SW1 and SW2, enter the Port-channel interface configuration mode by using the interface port-channel 44 command.
On both SW1 and SW2, configure the Port-channel interface as a trunk link by using the switchport mode trunk command.
On both SW1 and SW2, configure the Port-channel interface to use 802.1q tags for VLAN identification by using the switchport trunk encapsulation dot1q command.
On both SW1 and SW2, configure VLAN 'MONITORING' as the untagged VLAN of the Port-channel interface by using the switchport trunk native vlan MONITORING command.
On both SW1 and SW2, exit the Port-channel interface configuration mode by using the exit command.
On both SW1 and SW2, save the configuration to NVRAM by using the copy running-config startup-config command.


NEW QUESTION # 556
Refer to the exhibit.

With which metric was the route to host 172.16.0.202 learned?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:
Explanation
Both the line "O 172.16.0.128/25" and "S 172.16.0.0/24" cover the host 172.16.0.202 but with the "longest (prefix) match" rule the router will choose the first route.


NEW QUESTION # 557
......

First of all, we have the best and most first-class operating system, in addition, we also solemnly assure users that users can receive the information from the 200-301 certification guide within 5-10 minutes after their payment. Second, once we have written the latest version of the 200-301certification guide, our products will send them the latest version of the 200-301 Test Practice question free of charge for one year after the user buys the product. Last but not least, our perfect customer service staff will provide users with the highest quality and satisfaction in the hours.

200-301 Exam Papers: https://www.validvce.com/200-301-exam-collection.html

Report this page